Types of Lawn Sprinkler Systems

Disclaimer: We earn a commission when you purchase items through our links at no extra cost to you.

types of lawn sprinkler systems

Are you tired of thinking as to which watering system would be the most efficient and effective for your beautiful lawn? Yes, it’s very natural to be worried. Because number of technical aspects are linked to the watering system for irrigating lawns. Among those, irrigation, water conservation, eco-friendliness, types of plants and flowers, finance, operation and management of the system etc. are the key.

The healthy rich grass that you want to have roll around your lawn is a major challenge to achieve. Choosing the right  sprinklers can help you get the flawless lawn  as well-planned watering system plays a significant role in growing a healthy ground. Therefore, before designing a lawn you must consider as to which type of sprinkler  would be most efficient as well as convenient for you in order to have a best one. 

However, considering above aspects, this article will be focusing on the types of Lawn Sprinkler Systems with details so that you can get familiar with all the systems and decide on the most efficient one for your own. 

1. Spray Irrigation

This is the most common type of lawn sprinkler system. This traditional form of sprinkler uses spray heads, some at ground level, some pop ups and some on extended, exterior pipes. This system allows water to get sprayed over the lawn through the tubes. Long tubes are entrenched in the lawn and connected with the water source. Water then shoots out of the tubes using sprayers.

Typically, a center pivot is used where there are fixed points that create a large irrigation sphere. Sprinklers are installed on top of the tubes and rotated throughout the landscape. Such types of sprinkler systems are ideal for light types of soil. This spray system can also be run by an electric device which makes the operation easier and flexible. Spray systems are most commonly used on small areas: turf, shrubs or flowerbeds.

They are best for plane surfaces and tend to waste more amount of water than other systems. Lawn owners need to regularly monitor the system while running to ensure neither it over water the plants nor run for a long time unnecessary.

This spray system is worthy for a smaller area which allows plant to have adequate amount of water with short span of time. The average sprinkler systems spray an average of 1.5 inches of water per hour. These systems are best for flat ground and absorbent soil.

2. Drip System

Drip Irrigation System is also popular among landscapers and irrigators as they are the most water-efficient to irrigate variety of plants and flower beds. Drip irrigation is a type of micro-irrigation system that has the potential to save water and nutrients by allowing water to drip slowly to the roots of plants, either from above the soil surface or concealed below the surface.

In other word, the water drops are discharged gradually into the ground that helps the water get soaked fully into the ground and prevent shortfall. The goal is to place water directly into the root and minimize evaporation. 

This system uses a portion of the water that overhead spray devices use. “Point source” drip system is comprised of drip tubing. It is installed across the planting bed. Through this system water is directly supplied to the base of the plants that saves water from over spray or misting. It offers flexibility to add, omit or change the location of the sprinkler or drippers. Additionally, drip irrigation system is easy to administer on a zone system. 

There are many different types of drip equipment which includes drippers, bubblers, soakers (inline emitters), and micro-sprayers. Each type of equipment comes for specific or single zone. That is why, it is not encouraged to mix different types of equipment to use for a specific zone or distribution line.

The release rate of drip emitters varies from one-half gallon to two gallons per hour and it depends on the type of plant, their sizes and soil quality. Generally, you would need at least one emitter device for every two-and-a-half feet of plant canopy.

3. Overhead Irrigation System

An overhead irrigation system follows the similar system like lawn sprinkler .Water is pumped in under pressure and sprayed down onto the plants from flat spray nozzles. These may be mounted on an overhead network of aluminum pipes or even simply mounted on the top of a pole. It’s a low-cost device compared to conventional sprinkler. This system is durable as well.  

4. Rotor Systems

This system is more efficient than spray heads. Rotor irrigation system is a set of sprinklers where water is rotated through the sprinkler head and onto your lawn or garden.

Rotor systems come in four main styles: Stream, Impact, Gear driven and Large turf. They cover large areas and discharge water more evenly than spray heads do. One of the unique features of them is, they move the focus of the water to allow the ground, plants and flowers to soak the water time to time. But one disadvantage is, quite a bit amount of water is gone by evaporation.

5. Soaker Hoses

Soaker hoses discharge water through a absorbent skin that pass through the hose. They are ideal for deep watering as gardeners conceal them in to the roots and watering lines of the garden or plants. They are relatively less costly and have the option to customize water discharge by setting  timer. Regular hoses may be connected to soaker hoses to control and distribute water where and when is it needed. 

Additional Tips to Consider

First, check the capacity of the system according to your landscaping needs. You may not need a robust system for a small lawn area, but in case of large yard, you might need something more advanced system.

You should also look at water supply system and availability of water as certain systems might need more water than other systems. 

Certain sprinkler systems could also be laborious and needs specific skills to install and maintain. In that case, you should consider whether the required skills and labor available with you to install and use that particular system if you plan to install them by your own management. Read also: 5 Best Lawn Mower Battery Charger Reviews

You should study the type of soil of your lawn as some systems are linked to the soil types.

The last one, you must check out your budget and affordability for a particular type of sprinkler system you plan to get. 

Concluding Remarks

As discussed earlier, sprinkler systems installed by the professionals, would irrigate your lawn or plants on a schedule basis in efficient manner. Traditional sprinklers are widely used for lawns, while drip lines work well for garden beds. You must keep in mind all aspects discussed above while choosing sprinkler for you. Because they would greatly impact on your healthy growing lawn. Our experts would love to guide you if you even would dream for an eco-friendly sprinkler system.

However, I strongly recommend that before deciding, you do some research as to which one would work best for your lawn. Then you can hire a certified contractor to provide you with all technical support for installation of Sprinkler system in your lawn.

As usual, we always would love to hear from you if you need any further support from us to make your dream comes true. Your valuable comments and feedback is always appreciated.

Leave a Comment