When you are boating, you need to secure your batteries’ connection. This necessity is highly applicable to trolling motors. For this, a trolling motor plug proves to be handy.
The connection between the trolling motor and the battery is dependent on the quality of the cap. You don’t want to get annoyed by the constant breaking of connection, especially when you are out in the water.
Is Trolling Motor Plug A Necessity?
You just don’t need a trolling motor plug. You need the best trolling motor plug. These tiny devices are the only thing that connects your motor from its power source. If you don’t have this one installed, how can you even run a boat in the first place?
Moreover, you need a trolling plug that can withstand any motions and vibrations. The plug that you should choose must not get brittle and heat up easily. Aside from that, the plug should be sturdy enough to keep the connection tight and secure.
Comparison of Top Picks
View Top 3 Trolling Motor Plug Reviews
 MotorGuide Accessories, Trolling Motor Plug and Receptacle
This trolling motor quick-connect power receptacle provides you with adequate tractability when it relates to bestride your trolling motor at altered positions. This casually matches 2-prong 12V, 24V, and 36V motors.
This isn't simply a little accessory by MotorGuide but installs in the bow and panel correctly. Another recognizable feature which it carries is its durable construction and includes a flexible joint and spring-loaded lid which works as a guard when the receptacle isn't getting functioned.
The MotorGuide is another master quality brand that has shown its complete dedication in manufacturing trolling motor accessories for quite 50 years. This confidently sets the quality for the foremost precise PinPoint GPS and therefore the most noise-less motors.
- Waterproof Sealing Cap;
- Corrosion-resistant Components;
- Universal Design And Affordable;
- Wire Holder Do Not Hold Wires Perfectly;
 Attwood Trolling Motor Plug
Using the Attwood Trolling Motor Plug is as simple as its looks. But don’t undermine the quality and performance of this plug.
The Attwood Trolling Motor Plug has three pins, which multiplies its performance compared to the ordinary one.
With a weight of only around 4 ounces, this trolling motor plug is easy to carry. Keeping it to a small storage would not even be a problem too.
The receptacle of the Attwood Trolling Motor Plug is covered with hard-plastic called as weather cap. This covering can withstand any rough and stressful conditions. Connecting your battery and motor with this plug is easy. However, there are some compatibility issues that you have to take note of this brand of plug.
- Molded Rubber Connectors;
- Covered With Weather Cap;
- No Noticeable Cons;
 Minn Kota Trolling Motor Plug & Receptacle
This trolling motor plug is from the same brand, Minn Kota. Hence, you can expect the same sturdy quality and assured performance from this plug.
It is made from an industrial-quality plastic that makes it durable and compact. Moreover, the entire construction can allow you to connect 2 and 3 pin type of wires. This feature enables this plug to attach three 12 volts batteries.
The working capacity of this device is 36 volts, which is virtually the same as MinnKota MKR-18 12V. Most importantly, the Minn Kota Trolling Motor Plug and Receptacle have anti-corrosive properties too and these make it another best trolling motor plug-in market.
- Waterproof Sealing Cap;
- Corrosion-resistant Brass Electrical Components;
- Compact And Durable Design;
- No Noticeable Cons;
Are Trolling Motor Plugs Universal?
Unfortunately, most trolling motor plugs and receptacles aren't compatible with one another as there's not a universal plug design.
Which Is The Best Motorguide Or Minn Kota?
Between the 2 brands, MotorGuide tends to supply a touch more bang-for-the-buck. When comparing motors with similar specs, MotorGuide tends to possess a small edge up terms of cost. ... However, MotorGuide does tend to possess a small edge on Minn Kota motors in terms of pricing for similar models.
What Size Trolling Motor Do I Need?
The general rule of thumb: you would like a minimum of 2 lbs. of thrust for every 100 lbs. of fully-loaded boat weight (people and kit included). If things like wind or current are major factors where you fish, you'll be wanting a touch extra thrust.
Last Updated on January 1, 2021 by Leo Evans
Was this article helpful?
Hi, it’s me, Leo Evans. I am a gadget blogger. I have passion over different marine sports and gadgets. My hobbies and experience help me to draw my profession. For my living, I need to investigate and test various gadget and power generator tools I use in my marine and outdoor activities. I share my experience so one can easily understand what should do and what not. My goal is to help others with my work.